If you are pricing out a driveway, parking pad, or jobsite base this year, you are probably asking:
How much does a quad axle load cost in 2026?
Short answer in most U.S. markets:
$400 to $1,200 per load delivered
Depending on material, distance, and state weight laws.
Below is a contractor style breakdown so you can estimate your own quad axle load of gravel with realistic numbers.
A quad axle dump truck is the standard heavy haul truck used for bulk gravel delivery on residential and commercial projects.
It has:
• Four rear axles
• Higher legal weight capacity than a tri axle
• Designed for hauling dense materials
Typical Quad Axle Capacity
In most states:
• 18 to 22 tons per load
• Some states allow up to 25 tons depending on bridge and weight laws
This is why contractors prefer quad axle gravel delivery. Fewer trips means lower cost per ton.
Common Materials Hauled
A quad axle dump truck typically delivers:
• crusher run
• #57 gravel
• #67 limestone
• recycled concrete
• recycled asphalt
• asphalt millings
• sand and base stone
When someone asks about quad axle capacity or tons per load, they are usually planning a driveway, road base, or commercial lot.
How Many Tons Are in a Quad Axle Load?
In most U.S. states:
18 to 22 tons of gravel per load
Up to 25 tons in some regions
If you are searching for:
• how much gravel in a quad axle
• quad axle gravel capacity
• tons of gravel per load
Here is how to convert it into something practical.
Tons to Cubic Yards
Most gravel weighs about 1.3 to 1.5 tons per cubic yard.
Example:
20 tons ÷ 1.4 = about 14 cubic yards
Weight varies by material:
• #57 gravel is lighter
• crusher run is heavier
• limestone density varies by region
Always confirm with your supplier.
Average Cost of a Quad Axle Load of Gravel in 2026
Here is how contractors calculate it.
Step 1: Material Cost
Gravel price per ton in 2026:
• crusher run: $18 to $35 per ton
• #57 gravel: $20 to $40 per ton
• #67 limestone: $25 to $45 per ton
• recycled concrete: $12 to $25 per ton
• asphalt millings / recycled asphalt: $15 to $30 per ton
Prices vary by location. If you are searching for gravel prices near me, this is the range you will likely see across most states.
Step 2: Multiply by Tons
Example using 20 tons:
$25 per ton × 20 tons = $500 material cost
Step 3: Add Dump Truck Delivery Cost
Typical dump truck delivery fee:
• $75 to $250 depending on distance from quarry
• More if you are 20 to 40 miles out
Typical Total Load Cost
Most quad axle load of gravel price totals fall between:
$400 on the low end
$1,200 on the high end
Lower cost:
• recycled materials
• short haul distance
Higher cost:
• premium limestone
• longer haul
• smaller rural market
That is your realistic bulk gravel delivered cost in 2026.
What Affects the Price?
If you are comparing gravel delivered cost across suppliers, here is what moves the number.
1. Distance From Quarry
Fuel and time drive price.
The further you are from the pit, the higher the dump truck delivery cost.
2. Material Type
Crusher run is usually cheaper than decorative limestone.
Recycled materials are often the lowest cost per ton.
3. State Weight Laws
Some states cap loads at 18 tons.
Others allow 22 to 25 tons.
More tons per load = lower cost per ton delivered.
4. Local Demand
Spring and summer construction season raises pricing.
Searching for gravel cost per ton in peak season may show higher numbers.
Quad Axle vs Tri Axle – Which Is Cheaper?
A common question when comparing quotes.
Tri Axle Dump Truck
• 12 to 16 tons per load
• Lower total weight
• Often used for tighter residential access
Quad Axle Dump Truck
• 18 to 22 tons per load
• Fewer trips required
• Lower cost per ton delivered
If you need 40 tons total:
Tri axle may require 3 loads
Quad axle may require 2 loads
Fewer deliveries usually means lower bulk gravel delivery cost overall.
If access allows it, quad axle is typically more economical.
How Much Area Will One Load Cover?
This is where most homeowners underestimate.
Using a 20 ton load:
At 2 Inches Deep
Covers roughly 2,000 square feet
At 4 Inches Deep
Covers roughly 1,000 square feet
Simple Gravel Coverage Calculator Formula
1 ton covers about:
• 100 square feet at 2 inches depth
• 80 square feet for heavier material
If you are searching:
• gravel coverage calculator
• how much gravel do I need
Multiply your square footage by desired depth and divide by coverage per ton.
When in doubt, round up. Contractors always account for compaction and waste.
How to Order a Quad Axle Load Near You
If you are ready for quad axle dump truck delivery, here is the simple process contractors follow.
1. Choose Your Material
Decide between:
• crusher run for base
• #57 gravel for drainage
• #67 limestone for smaller stone
• recycled asphalt or asphalt millings for driveway resurfacing
2. Calculate Tons of Gravel Needed
Use coverage estimates above.
3. Confirm Site Access
A quad axle dump truck is large.
You need:
• 10 to 12 feet width minimum
• solid ground
• overhead clearance
4. Schedule Delivery
Search for:
• gravel delivery near me
• bulk gravel supplier
• quad axle load of gravel price
Get a per ton price and delivery fee quote.
Final 2026 Pricing Summary
For most U.S. locations:
Gravel price per ton: $12 to $45
Tons per load: 18 to 22
Typical quad axle load cost: $400 to $1,200 delivered
If you want the lowest cost per ton:
• Order full loads
• Use quad axle instead of tri axle when possible
• Buy from the closest quarry
That is the transparent breakdown contractors use when pricing a quad axle load of gravel in 2026.
