Sand Calculator
Sand is used for paver bases, sandboxes, masonry work and leveling. Enter your area and depth to see how many cubic yards and tons of sand to order for your project.
≈ 8.3 wheelbarrow loads
Result
0.93yd³
1.25tons
Estimates are based on typical material density. Actual weight varies with moisture and grain size.
Order your material
Based on your calculation, here is how much to order of each product.
View all products in this category
How to measure for Sand
- Measure the length and width of the area in feet. For circular areas, measure the diameter instead.
- Choose the depth of your layer in inches. Decorative layers and walkways usually need 2-3 inches, driveways 4-6 inches.
- Enter the dimensions in the calculator above to get the volume in cubic yards and the weight of Sand in tons.
- Add about 10% for compaction and settling, and round up to the nearest whole ton when ordering.
Material density & coverage reference
| Material | Density (loose) | Tons per cubic yard | Coverage per ton |
|---|---|---|---|
| Gravel | 100 lb/ft³ | 1.35 | ~80 sq ft at 3 in deep |
| Sand | 100 lb/ft³ | 1.35 | ~80 sq ft at 3 in deep |
| Crushed Stone | 100 lb/ft³ | 1.35 | ~80 sq ft at 3 in deep |
| Limestone | 98 lb/ft³ | 1.32 | ~82 sq ft at 3 in deep |
| Topsoil | 78 lb/ft³ | 1.05 | ~103 sq ft at 3 in deep |
| Mulch | 30 lb/ft³ | 0.4 | ~267 sq ft at 3 in deep |
| River Rock | 103 lb/ft³ | 1.39 | ~78 sq ft at 3 in deep |
Values are typical estimates for loose, dry material. Actual density varies by source, moisture and grain size.